Welcome, Guest. Please Login or Register
 Dynon Avionics, Inc.
  Welcome to the Dynon Avionics Forum! If you need immediate assistance, call 425-402-0433.
 
  HomeHelpSearchLoginRegister  
 
 
  Dynon Avionics Forum › EFIS discussion › EFIS General Discussion › Can I get more from it?
(Moderators: Dynon Administrator, Dynon Support) - (Moderator Groups: Dynon Employee, Dynon Official)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1
Send Topic Print
Can I get more from it? (Read 639 times)
Nov 9th, 2010 at 5:24am

Faeta   Offline
New Member

Posts: 1
 *
 
Hi,

I've recently installed Skyview in my Atec Faeta, with a Garmin Area GPS, Funkwerk Com (ATR500) and Funkwerk mode S transponder (TRT800H). I do recieve GPS data to the Skyview, but is there any way that I could couple the XNDR to the Skyview and get access to the Traffic ? In the future I'm also hoping to have the FLARM coupled since the aircraft is used both for cross country and glider towing.

Anyway - the reason for asking, is that the manufacturer did the installation, but without giving me a diagram to see what they did.

Hope you can help.

Best regards

By the way I'm based in Denmark, Scandinavia.
Mike
 
Back to top 
IP Logged
 
Reply #1 - Dec 4th, 2010 at 11:12am

DY351   Offline
Frequent Poster
Chelles France

Gender: male
 Posts: 12
 **
 
Good evening
Ifind this question very interresting...
No answer ?
Be in France Grin
 
Dynamic 100cv Dynon skyview 1000 garrecht 1500 traffic
Back to top 
IP Logged
 
Reply #2 - Dec 7th, 2010 at 11:07am

Dynon Support   Offline
Forum Administrator
Dynon Employee
Dynon Technical Support

Posts: 9815
 *****
 
http://www.dynonavionics.com/docs/news_Version26_October2010.html

As explained there, as of v2.6, SkyView supports display of traffic for transponders "that output the industry standard GTX 330 TIS traffic format".

I scanned through an online manual for the TRT800H and didn't find any mention of GTX 330 compatibility, so with v2.6 and the immediate future, your transponder isn't compatible with SkyView to display traffic.
 
Back to top 
IP Logged
 
Reply #3 - Aug 24th, 2011 at 9:45am

DY351   Offline
Frequent Poster
Chelles France

Gender: male
 Posts: 12
 **
 
Hi
If I change my trt 800 by a transponder  trig for exemple get traffic  information display on my SV.
I am in Europe
France

If yes what should be change in the installation of the transponder?
thanks
 
Dynamic 100cv Dynon skyview 1000 garrecht 1500 traffic
Back to top 
IP Logged
 
Reply #4 - Aug 24th, 2011 at 10:48am

Dynon Support   Offline
Forum Administrator
Dynon Employee
Dynon Technical Support

Posts: 9815
 *****
 
The traffic that is available from the Dynon transponder is via TIS. TIS is only available via some US terminal radar installations (at some class B and C airports, more or less). It is also being phased out. In Europe, the Zaon XRX is a passive traffic system that can work and can connect with SkyView to provide traffic. Finally, Garrecht makes a module that can connect to Flarm and PowerFlarm transceivers, which are popular in Europe, and send that information to SkyView: http://smartsensor.de/index.php/en/ads-b/trx-1090. I believe they are planning on one (I thought it was a yellow colored box) that integrates the PowerFlarm receiver right into that box, but I don't see it on their website.
 
Back to top 
IP Logged
 
Reply #5 - Aug 24th, 2011 at 11:36am

phvdw   Offline
Frequent Poster
belgium

Gender: male
 Posts: 19
 **
 
I believe it will be trx 1500 (appears in their banner- coming soon) Smiley
 
Back to top 
IP Logged
 
Reply #6 - Aug 24th, 2011 at 11:55am

phvdw   Offline
Frequent Poster
belgium

Gender: male
 Posts: 19
 **
 
http://www.garrecht.com/index.php/en/ads-b

unfortunely only in German, conclusion if you connect a trx device you shall contact dynon, but it should compatibel
(free translation of last paragraph)
yellow box also available; found in a internet shop in germany
 
Back to top 
IP Logged
 
Reply #7 - Sep 7th, 2011 at 6:42am

mcm   Offline
New Member
Berlin, Germany

Gender: male
 Posts: 2
 *
 
yellow box now published at Garrecht
http://www.garrecht.com/index.php/en/ads-b/trx-1500
DataPort specification downloadable there too.
Any idea how the datastream will show up on SV?
-Stefan
 
Back to top 
IP Logged
 
Reply #8 - Sep 7th, 2011 at 11:14am

Dynon Support   Offline
Forum Administrator
Dynon Employee
Dynon Technical Support

Posts: 9815
 *****
 
It basically provides a TIS stream, so it looks just like any other traffic source when connected to SkyView.
 
Back to top 
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print
‹ Previous Topic | Next Topic ›
  « Home ‹ Board Top of this page

Dynon Avionics Forum » Powered by YaBB 2.5 AE!
YaBB Forum Software © 2000-2010. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge