Welcome, Guest. Please Login or Register
Dynon Avionics, Inc.
 
Welcome to the Dynon Avionics forum!
  HomeHelpSearchLoginRegister  
 
 
Page Index Toggle Pages: 1
Send Topic Print
Skyview failure (Read 1802 times)
Sep 23rd, 2012 at 6:10pm

Mixhael proudfoot   Offline
New Member
I love flying!

Posts: 2
*
 
Hi I have a new skyview 10 inch display( 6 weeks old and had worked well until now)which will not boot-up completely.
It goes through the usual bootup procedure but will not move on the the final screen and display usual functions ie PFD, EMIS MAP.
Can you offer suggestions?
Thanks
 
IP Logged
 
Reply #1 - Sep 23rd, 2012 at 8:13pm

Ken Kopp   Offline
SkyView Flight Tester
"Other" Flight Tester
D10/D100 Flight Tester
Autopilot Tester
Wellington Aero Club (FD38) FL

Gender: male
Posts: 1472
*****
 
Try the 3-finger reboot trick.

Simultaneously press the left two buttons while also pressing the 5th button (1,2 & 5 all together).  This initiates a reboot sequence.

 
IP Logged
 
Reply #2 - Sep 24th, 2012 at 4:06pm

Dynon Support   Offline
Forum Administrator
Dynon Employee
Dynon Technical Support

Posts: 13226
*****
 
Do you have the external backup battery connected? If so, does disconnecting it change the behavior? In any case, give our tech support staff a call at 425-402-0433 for some personal assistance with your issue.
 

Please do not use Private Messaging on forum to contact. For private support:
Email: support at dynonavionics dot com
Phone: 425-402-0433 (7am-5pm Pacific weekdays)
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print