Welcome, Guest. Please Login or Register
Dynon Avionics, Inc.
 
Welcome to the Dynon Avionics forum!
  HomeHelpSearchLoginRegister  
 
 
Page Index Toggle Pages: 1
Send Topic Print
Skyview interface (Read 1391 times)
Jun 25th, 2013 at 8:42am

tom.casey   Offline
New Member
I love flying!

Posts: 2
*
 
I realize the D1 is designed as a stand alone, easy to use backup intrument, but...
To be a true standby flight instrument it reallt needs the ability to display actual altitude and airspeed. Any chance of a quick connection to the skyview to receive airspeed and altitude data from the ADHRS?
Hope springs eternal...
 
IP Logged
 
Reply #1 - Jun 25th, 2013 at 9:32am

Dynon Support   Offline
Forum Administrator
Dynon Employee
Dynon Technical Support

Posts: 13226
*****
 
The D1 is really sold as a backup for use in certified airplanes, so a connection to SkyView is not something that has been considered. We see a lot more D6 installs in experimentals, which does have a fully redundant standard airspeed and altitude display.

How is it a backup to SkyView if it relies on SkyView's airspeed and altitude? At the time you need it, it would be using GPS since SkyView was failed, so I don't see the obvious advantage here.
 

Please do not use Private Messaging on forum to contact. For private support:
Email: support at dynonavionics dot com
Phone: 425-402-0433 (7am-5pm Pacific weekdays)
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print