Welcome, Guest. Please Login or Register
Dynon Avionics, Inc.
 
Welcome to the Dynon Avionics forum!
  HomeHelpSearchLoginRegister  
 
 
Page Index Toggle Pages: 1
Send Topic Print
Capstan servo clamps (Read 1117 times)
Feb 3rd, 2015 at 1:47am

Mike M   Offline
New Member
I love flying!

Posts: 3
*
 
In the UK the LAA require me to obtain test data regarding cable clamp slippage prior to getting the appropriate permits. I'm fitting capstan servos to a Glastar.
I assume Dynon have already carried out these tests and have this info, how can I get hold of it?
Thanks
 
IP Logged
 
Reply #1 - Feb 20th, 2015 at 10:24am

Mike M   Offline
New Member
I love flying!

Posts: 3
*
 
Just as a follow up.
I couldn't find any data regarding slippage tests so put together a test method which was ok'd by the LAA to test a clamp up to 150% of the capstan shear pin torque value. It past with flying colours and I've since heard that Dynon will replace the clamps and bridle I used free of charge. Thanks Dynon.
 
IP Logged
 
Reply #2 - Mar 10th, 2017 at 7:54am

gcream   Offline
New Member
I love flying!

Posts: 2
*
 
Do you have any pictures of your setup?  Did you make the brackets yourself?
 
IP Logged
 
Reply #3 - Oct 25th, 2017 at 1:24am

Mike M   Offline
New Member
I love flying!

Posts: 3
*
 
Have sent a pm. Sorry for the delay.
 
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print