Welcome, Guest. Please Login or Register
Dynon Avionics, Inc.
 
Welcome to the Dynon Avionics forum!
  HomeHelpSearchLoginRegister  
 
 
Page Index Toggle Pages: 1
Send Topic Print
Unable to access G-meter on D2 (Read 1817 times)
Sep 5th, 2015 at 12:28pm

Luiz G. Richieri   Offline
New Member
I love flying!

Posts: 2
*
 
All I get pressing the M button is the message "Hold for settings menu", which stays there forever unless I restar the unit. I press it for as long as I want and nothing ever happens but this message.

I've tried the reset button several times, it always comes back this way.

Any help or ideas?
 
IP Logged
 
Reply #1 - Sep 8th, 2015 at 2:30pm

Dynon Support   Offline
Forum Administrator
Dynon Employee
Dynon Technical Support

Posts: 13226
*****
 
Apologies for the confusion on how to invoke the G-Meter on the D2.

To switch between the normal display and the G-Meter display, after the D2 is booted up, just "tap" and release the M button (half a second or so). Pushing and holding the M button gets you into the configuration menu.

Luiz G. Richieri wrote on Sep 5th, 2015 at 12:28pm:
All I get pressing the M button is the message "Hold for settings menu", which stays there forever unless I restar the unit. I press it for as long as I want and nothing ever happens but this message.

I've tried the reset button several times, it always comes back this way.

Any help or ideas?

 

Please do not use Private Messaging on forum to contact. For private support:
Email: support at dynonavionics dot com
Phone: 425-402-0433 (7am-5pm Pacific weekdays)
IP Logged
 
Reply #2 - Sep 9th, 2015 at 5:08am

Luiz G. Richieri   Offline
New Member
I love flying!

Posts: 2
*
 
Guys, you didn't get it! I have a malfunction here. Tapping the M button, I do not switch to G-meter like it used to... Immediately comes the "hold for settings menu" message which will never desappear again, no matter what I do....
 
IP Logged
 
Reply #3 - Sep 9th, 2015 at 9:20am

Dynon Support   Offline
Forum Administrator
Dynon Employee
Dynon Technical Support

Posts: 13226
*****
 
Apologies that we didn't get it  Sad Your D2 will have to be repaired at Dynon Avionics. Please call (425-402-0433) or email (support AT dynonavionics DOT com) our Technical Support group to set up a Return Material Authorization (RMA) for the repair of your D2.

Luiz G. Richieri wrote on Sep 9th, 2015 at 5:08am:
Guys, you didn't get it! I have a malfunction here. Tapping the M button, I do not switch to G-meter like it used to... Immediately comes the "hold for settings menu" message which will never desappear again, no matter what I do....

 

Please do not use Private Messaging on forum to contact. For private support:
Email: support at dynonavionics dot com
Phone: 425-402-0433 (7am-5pm Pacific weekdays)
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print