Welcome, Guest. Please Login or Register
Dynon Avionics, Inc.
 
Welcome to the Dynon Avionics forum!
  HomeHelpSearchLoginRegister  
 
 
Page Index Toggle Pages: 1
Send Topic Print
D1 wanders (Read 1707 times)
Nov 19th, 2015 at 6:15pm

Molokai Bruce   Offline
New Member
I love flying!

Posts: 2
*
 
Same problem here with a D1.
Worked fine for a couple of years, but now wanders once in a while. Sometimes works okay, sometimes not.
I bought a D2, which works fine in the same mount.
I flashed the D1 a couple of times. It worked for awhile each time, but now won't flash and again, sometimes works and sometimes not.
I hope I can fix the D1, and use it as a backup for my wife's side of the panel.
 
IP Logged
 
Reply #1 - Nov 20th, 2015 at 4:59pm

Dynon Support   Offline
Forum Administrator
Dynon Employee
Dynon Technical Support

Posts: 13226
*****
 
Bruce:

It sounds like one of the inertial sensors in your D1 has drifted out of spec and the D1 requires repair. Please contact Technical Support - 425-402-0433 or support at dynonavionics dot com to arrange for a Return Material Authorization (RMA).

Molokai Bruce wrote on Nov 19th, 2015 at 6:15pm:
Same problem here with a D1.
Worked fine for a couple of years, but now wanders once in a while. Sometimes works okay, sometimes not.
I bought a D2, which works fine in the same mount.
I flashed the D1 a couple of times. It worked for awhile each time, but now won't flash and again, sometimes works and sometimes not.
I hope I can fix the D1, and use it as a backup for my wife's side of the panel.

 

Please do not use Private Messaging on forum to contact. For private support:
Email: support at dynonavionics dot com
Phone: 425-402-0433 (7am-5pm Pacific weekdays)
IP Logged
 
Reply #2 - Nov 24th, 2015 at 8:41pm

Molokai Bruce   Offline
New Member
I love flying!

Posts: 2
*
 
Email sent.
I found the invoice. It was 1/29/13, so I just made the 3 year warranty period?

I also have a new Dynon D2, 32 days old via Aircraft Spruce and it just developed white lines across the top.
Also included that in my email asking for support, today.
See picture attached.
 

D2_white_lines.jpg (4915 KB | )
D2_white_lines.jpg
IP Logged
 
Reply #3 - Nov 25th, 2015 at 11:14am

Dynon Support   Offline
Forum Administrator
Dynon Employee
Dynon Technical Support

Posts: 13226
*****
 
The D1 and D2 have a 1 year warranty - see the Dynon Avionics Warranty page towards the bottom of the chart.

Molokai Bruce wrote on Nov 24th, 2015 at 8:41pm:
Email sent.
I found the invoice. It was 1/29/13, so I just made the 3 year warranty period?

I also have a new Dynon D2, 32 days old via Aircraft Spruce and it just developed white lines across the top.
Also included that in my email asking for support, today.
See picture attached.

 

Please do not use Private Messaging on forum to contact. For private support:
Email: support at dynonavionics dot com
Phone: 425-402-0433 (7am-5pm Pacific weekdays)
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print