Welcome, Guest. Please Login or Register
Dynon Avionics, Inc.
 
Welcome to the Dynon Avionics forum!


  HomeHelpSearchLoginRegister  
 
 
Page Index Toggle Pages: 1
Send Topic Print
Efis & Ems intermittent Dsab connection loss (Read 1083 times)
Jun 25th, 2016 at 12:46pm

sportcruiserj   Offline
New Member
Nottinghamshire UnitedKingdom

Gender: male
Posts: 2
*
 
I've had a D100 & D120 installed for over 5years.
And occasionally get a loss of the connection via dsab.
I have checked for loose connection and moved the cables looking for a damaged wire. Today this happened around 20 time in 3hr. I get a dsab network connection lost message for the servos and ap47 And ems not detected message to.
« Last Edit: Jun 26th, 2016 at 2:02am by sportcruiserj »  

image_004.jpeg (102 KB | 216 )
image_004.jpeg
IP Logged
 
Reply #1 - Jun 27th, 2016 at 5:15pm

Dynon Avionics   Offline
Dynon Official
Dynon Technical Support

Posts: 13047
*****
 
If you're positive that the DSAB wires are sound, you may have an issue with one of the items on the DSAB network. Give our technical support team a call at 425-402-0433 or an email at support at dynonavionics dot com.
 

Please do not use Private Messaging on form to contact. For private support:
Email: support at dynonavionics dot com
Phone: 425-402-0433 (7am-5pm Pacific weekdays)
IP Logged
 
Reply #2 - Jun 29th, 2016 at 2:38pm

sportcruiserj   Offline
New Member
Nottinghamshire UnitedKingdom

Gender: male
Posts: 2
*
 
Update I have had the opportunity to swap the d100 to another Sportcruiser with the same installation. and the D100 fault was transferred to the other aircraft. so I have a faulty dsab in the D100. this fault has been happening go 5yr
but only happened onece every now and then. I assumed it was a faulty wire but could never locate the problem.
 
IP Logged
 
Reply #3 - Oct 28th, 2018 at 10:18am

borge   Offline
Frequent Poster

Posts: 28
**
 
Dynon Avionics wrote on Jun 27th, 2016 at 5:15pm:
If you're positive that the DSAB wires are sound, you may have an issue with one of the items on the DSAB network. Give our technical support team a call at 425-402-0433 or an email at support at dynonavionics dot com.

 
IP Logged
 
Reply #4 - Oct 28th, 2018 at 11:29am

borge   Offline
Frequent Poster

Posts: 28
**
 
I have installed Efis D-100 and EMS d-120 together with HS- 34 in my plane. This has been  working fine since installation 2010. Yesterday just before take of the engine stopped and when I started again the EFIS showed the message "EMS MAIN EMS NOT DETECTED like showed on the attached picture and the EMS stays Blue with Dynon logo on. Any idea what could be the problem here?
 

IMG_0646.JPG (2822 KB | 14 )
IMG_0646.JPG
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print