Welcome, Guest. Please Login or Register
Dynon Avionics, Inc.
 
Welcome to the Dynon Avionics forum!
  HomeHelpSearchLoginRegister  
 
 
Page Index Toggle Pages: 1
Send Topic Print
D10A altimeter problems. (Read 1301 times)
Oct 13th, 2016 at 6:29am

Nigel Michel-Smith   Offline
New Member
I love flying!

Posts: 1
*
 
Hi, please could you assist me with some information. I have an EFIS D10A, I have just upgraded the software to the new version 5.6.1 hoping that this would solve the problem. Before the software update, approximately 2 months ago the altimeter began reading about 2000 feet at sea level, this situation worsened and the altimeter now reads 30 000 feet at sea level. The situation has not improved even since the update has been done. How can I solve this problem?
 
IP Logged
 
Reply #1 - Oct 13th, 2016 at 12:40pm

Dynon Support   Offline
Forum Administrator
Dynon Employee
Dynon Technical Support

Posts: 13226
*****
 
You don't mention airspeed, is it correct? If so, this points to the altitude sensor having failed.

You should contact our tech support and have us inspect the D10A.
« Last Edit: Oct 13th, 2016 at 3:31pm by Dynon Support »  

Please do not use Private Messaging on forum to contact. For private support:
Email: support at dynonavionics dot com
Phone: 425-402-0433 (7am-5pm Pacific weekdays)
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print