Welcome, Guest. Please Login or Register
Dynon Avionics, Inc.
 
Welcome to the Dynon Avionics forum!
  HomeHelpSearchLoginRegister  
 
 
Page Index Toggle Pages: 1
Send Topic Print
D2 Startup and shutdown with ships power (Read 1863 times)
Dec 25th, 2016 at 7:21pm

Richard Fazio   Offline
Senior Member

Gender: male
Posts: 284
****
 
I know the D2 will start up when powered up from ships power. Can it be set to shutdown also when ships power is lost?
 

Richard Fazio
RV-6, Skyview 10"
AP, ADS-B, Xponder
IP Logged
 
Reply #1 - Dec 27th, 2016 at 12:16pm

PlaneCurious   Offline
Frequent Poster
Interested in avionics

Posts: 15
**
 
Yes, this is possible. From Page 6-2 of the D2 guide:
ADJUSTING SETTINGS
You can adjust settings such as ground speed units (KTS / MPH / KPH), altitude units (feet /
meters), whether or not the D2 turns off when external power is removed/lost, and whether the
D2 automatically shuts down after a period of inactivity. To adjust settings on your D2:
 Press and hold the Menu Button to enter the Settings Menu.
 Press the Rocker to advance through different settings.
 Move the rocker up and down to adjust a selected setting.
 When you are finished, press the Menu Button again to exit the Settings Menu.


Richard Fazio wrote on Dec 25th, 2016 at 7:21pm:
I know the D2 will start up when powered up from ships power. Can it be set to shutdown also when ships power is lost?

 
IP Logged
 
Reply #2 - Dec 27th, 2016 at 5:07pm

Richard Fazio   Offline
Senior Member

Gender: male
Posts: 284
****
 
Curious,

     Thanks so much for getting back to me. I couldn't figure out how to get into the settings. Saw it in the manual but couldn't get it to work. Finally figured it out today. And see the settings.

RF
 

Richard Fazio
RV-6, Skyview 10"
AP, ADS-B, Xponder
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print