Welcome, Guest. Please Login or Register
Dynon Avionics, Inc.
Welcome to the Dynon Avionics forum!

Note: This forum will be less actively monitored while we are at AirVenture Oshoksh 2017.
For technical support needs, please contact us at 425-402-0433 or support at dynonavionics dot com.
Page Index Toggle Pages: 1
Send Topic Print
Connect IFLY740 to D10A (Read 459 times)
Feb 19th, 2017 at 7:29pm

John MN   Offline
New Member
I love flying!

Posts: 4
Does the information wire from the IFLY740 go to serial port (DB25)?   EFIS-D10A Installation Guide p 3-4

P 3-4 of the Guide "The following connection schemes assume that the external devices share a common ground with the Dyonon product(s)"  I have the IFLY740, D10A,EMS D10, Trutrak a/p as well as just about everything else grounded to the forest of tabs on my RV4 firewall.  Does that mean that I can ground the 740 directly to the FOT or do I have to solder the 740 ground wire to the D10A ground wire as well as the a/p ground wire?  Sorry for the beginner type questions.
IP Logged
Reply #1 - Feb 20th, 2017 at 12:02pm

RayInGA   Offline
Full Member
I love aviation!
Richmond Hill, GA

Gender: male
Posts: 241

The FOT would meet the requirements of a shared ground.

Ray Eaker
RV-7A flying since 27 Jan 2017
Dual Skyview 1000T with all the standard Dynon VFR goodies and ADS-B out.
IP Logged
Page Index Toggle Pages: 1
Send Topic Print