Welcome, Guest. Please Login or Register
Dynon Avionics, Inc.
 
Welcome to the Dynon Avionics forum!


  HomeHelpSearchLoginRegister  
 
 
Page Index Toggle Pages: 1
Send Topic Print
SV-COM wiring (Read 526 times)
Aug 9th, 2017 at 6:08pm

Tommy Turner   Offline
Frequent Poster

Posts: 15
**
 
Can someone point me to a wiring diagram that shows the SV-COM wired to an audio panel other than Dynons. I am using a Garmin GMA-240 audio panel.

Thanks

Tommy
 
IP Logged
 
Reply #1 - Aug 10th, 2017 at 6:58am

N214ST   Offline
Full Member

Posts: 121
***
 
Tommy, I did a real quick look at your request and think the following connections are correct, but double check.

P2401
Dynon audio out/hi  pin 10    to GMA Com 1 audio in/hi pin 9
Dynon audio out/lo  pin 9     to GMA Com 1 audio in/lo pin 10
Dynon PPT  pin 5       to GMA Com 1 MIC key out pin 12
Dynon MIC  pin 1     to GMA Com 1 MIC audio out hi pin 11
Dynon MIC lo  pin 2     to GMA GND
 
IP Logged
 
Reply #2 - Aug 11th, 2017 at 5:29am

Tommy Turner   Offline
Frequent Poster

Posts: 15
**
 

That should work.

Thanks

Tommy
 
IP Logged
 
Reply #3 - Nov 9th, 2018 at 4:10pm

birddog486   Offline
New Member
I love flying!

Posts: 1
*
 
I know this is an old thread but I just want to make sure this worked out. I'll be wiring the SV 425 to the garmin GMA245 and I'm struggling with the diagrams different wording.

I'll be wiring this to com 2 and I'm questioning the pinouts
 
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print