Welcome, Guest. Please Login or Register
Dynon Avionics, Inc.

Dynon will be closed 12/24-12/27, and 1/1. This forum will be minimally staffed during the last week of Dec and through the New Year

Have a great Chrismas and New Year!

Page Index Toggle Pages: 1
Send Topic Print
Skyview flap indicator (Read 589 times)
Jan 25th, 2018 at 8:11am

robint   Offline
Frequent Poster

Posts: 24
Please can anyone tell me the type of output required from a potentiometer to my Skyview. I have a potentiometer with a range of .5k to 5k ohms. Can I ground one side of it and use the other side for the input. I can either use an increasing output or decreasing output, does it matter which one.
Thanks, Robin
IP Logged
Reply #1 - Jan 25th, 2018 at 6:18pm

Dynon Avionics   Offline
Dynon Official
Dynon Technical Support

Posts: 13092
That'll work. But you'll want to connect it to both power and ground, with the output connected to the EMS. There's some additional detail in our installation manual. See page 7-66  of the installation manual for the details.

Please do not use Private Messaging on form to contact. For private support:
Email: support at dynonavionics dot com
Phone: 425-402-0433 (7am-5pm Pacific weekdays)
IP Logged
Page Index Toggle Pages: 1
Send Topic Print