Welcome, Guest. Please Login or Register
Dynon Avionics, Inc.
Page Index Toggle Pages: 1
Send Topic Print
Upgrade from SV Classic to HDX (Read 505 times)
Feb 1st, 2018 at 11:33am

John Korstian   Offline
New Member
Taildraggers Forever!
FW, Texas

Gender: male
Posts: 2

My Kitfox is equipped with a 10" SV Classic/SP-XPNDR-261 Mode S/SV-ADSB-472/SV-GPD 2020.

Is a wiring mod required to upgrade to 10" HDX?
IP Logged
Reply #1 - Feb 1st, 2018 at 1:03pm

RayInGA   Offline
I love aviation!
Richmond Hill, GA

Gender: male
Posts: 568

The HDX uses the same connections as your Classic box so it is an easy swap. There may be some files to backup/restore from the old to the new.

Also, the HDX will fit in the same panel cut-out but does not use all the same mounting screws (4 of 6 are the same, I think). I understand an adapter plate is available to fill the gap at the bottom of the HDX.

« Last Edit: Feb 1st, 2018 at 1:08pm by RayInGA »  

Ray Eaker
RV-7A flying since 27 Jan 2017
Dual Skyview 1000T with all available Dynon VFR goodies
IP Logged
Page Index Toggle Pages: 1
Send Topic Print