Welcome, Guest. Please Login or Register
Dynon Avionics, Inc.
Page Index Toggle Pages: 1
Send Topic Print
ADS-B IN OFFLINE (Read 765 times)
Feb 24th, 2018 at 7:53am

Burt   Offline
New Member
I love flying!

Posts: 3
Thwice now I've had ADS-B IN OFFLINE caution messages on my Skyview.  In between I've had flights where everything worked perfectly.  TIS traffic has been visible when the ADS-B wasn't working.  I haven't been able to locate a source for adsb ground station status (NOTAMs?) to help determine if it's my problem or theirs.  I'm in Spokane, WA and have been in the local area both times I got the failure message.
IP Logged
Reply #1 - Feb 25th, 2018 at 3:59pm

Steve W.   Offline

Posts: 1033
Does this happen on start-up, or in flight?  Does it clear itself, or do you have to power cycle to clear it?
IP Logged
Reply #2 - Feb 26th, 2018 at 5:51pm

Dynon Avionics   Offline
Dynon Official
Dynon Technical Support

Posts: 13091
ADS-B IN OFFLINE means that SkyView isn't seeing the module at all. So that implies either a power or data wiring issue, or less commonly a problem with the module itself.

Please do not use Private Messaging on form to contact. For private support:
Email: support at dynonavionics dot com
Phone: 425-402-0433 (7am-5pm Pacific weekdays)
IP Logged
Page Index Toggle Pages: 1
Send Topic Print