Welcome, Guest. Please Login or Register
Dynon Avionics, Inc.
 
Welcome to the Dynon Avionics forum!


  HomeHelpSearchLoginRegister  
 
 
Page Index Toggle Pages: 1
Send Topic Print
ADSB 472 showing solid green light (Read 437 times)
Feb 25th, 2018 at 7:23am

BigFlapper   Offline
Frequent Poster
I love flying!
Gold HIll NC

Gender: male
Posts: 46
**
 
My 472 unit is showing a solid green light in the hangar but the Dynon screen shows ADSB ok?? In the installation manual it says that if a solid light return the unit. Is that the thing to do even if I'm getting an "ADSB OK" message?
 
IP Logged
 
Reply #1 - Feb 25th, 2018 at 9:32am

Garrett   Offline
Full Member
I love flying!
Tampa Fl

Posts: 180
***
 
I noticed the same when I installed mine I called Dynon it was just flickering so fast you can't really see it. Turned out it was OK. Smiley
 
IP Logged
 
Reply #2 - Mar 7th, 2018 at 12:11pm

Tyler Pattison   Offline
Dynon Employee
0x44 0x59 0x4e 0x4f 0x4e

Posts: 56
*****
 
BigFlapper wrote on Feb 25th, 2018 at 7:23am:
My 472 unit is showing a solid green light in the hangar but the Dynon screen shows ADSB ok?? In the installation manual it says that if a solid light return the unit. Is that the thing to do even if I'm getting an "ADSB OK" message?


The 472 LED is green most of the time, but will briefly flash orange when data is sent from SkyView to the 472. During normal operation, the LED will briefly turn orange at a rate of 1 time per second (1 Hz).
 
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print