Welcome, Guest. Please Login or Register
Dynon Avionics, Inc.
 
Welcome to the Dynon Avionics forum!


  HomeHelpSearchLoginRegister  
 
 
Page Index Toggle Pages: 1
Send Topic Print
Kavlico Fuel Pressure Sensor - Rotax 912 iS (Read 224 times)
Mar 24th, 2018 at 1:09am

Sunfish   Offline
Junior Member
I love flying!

Posts: 75
**
 
I've wired up the EMS 221 for a Rotax 912iS and am slowly working my way through configuration.

The fuel pressure sensor has a red "X" through it although I have checked it has 5 volts and a ground. Why won't it show "O.0 PSI"? Is this normal behavior? The sensor debug page shows a voltage, a cal value and the next column it says "nan" what does that mean?
 
IP Logged
 
Reply #1 - Mar 24th, 2018 at 4:32am

jakej   Online
Expert
Australia

Gender: male
Posts: 1522
*****
 
Nan usually means its not connected, in some way whether its physically not or via a setting.
 
IP Logged
 
Reply #2 - Mar 25th, 2018 at 10:42pm

Sunfish   Offline
Junior Member
I love flying!

Posts: 75
**
 
Fixed it - downloaded the latest EMS definitions file and it all seems to work now.
 
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print