Welcome, Guest. Please Login or Register
Dynon Avionics, Inc.
 
Welcome to the Dynon Avionics forum!


  HomeHelpSearchLoginRegister  
 
 
Page Index Toggle Pages: 1
Send Topic Print
Adding d100 and hs34 to existing d10a (Read 243 times)
Mar 27th, 2018 at 5:48am

Shemp   Offline
New Member
I love flying!

Posts: 6
*
 
Hello all, new poster.  I'm adding a  D100 and HS34 to my TV with existing D10A.  I have a GX50 gps and SL30 nav/com.  I'm also gonna be supplyinG a trutrak autopilot.  Has anyone done this?  Suggestions?

Thanks
 
IP Logged
 
Reply #1 - Apr 5th, 2018 at 11:29am

Shemp   Offline
New Member
I love flying!

Posts: 6
*
 
OK, I need to expand on this a bit.  I'm trying to figure out how to wire this up.  I have a GX 50 and SL 30 as well as a D10a, D100, and HS 34.  I also have a tru trak vizion auto pilot.

I'm guessing I need to split my gps signal somehow to feed the hs34 and the autopilot(vizion) separately.  So one of the gps feeds, as well as my sl30 nav signal, goes to the hs34, then to the d100 as primary and then dsab to the d10a.  My goal is to use my d10a as a dedicated dg and an emergency backup attitude indicator.  I also have an audio select panel, an annuciator control unit and a gps/vor/loc/gs indicator.  Currently, the d10a is not connected to any electronics but my wiring harness is built for it. 

Sorry this got so long and detailed.  Im hoping to get a general idea on how this will work and then decide if I need to hire it out. 

Oh yeah, Im adding this to my RV, not TV  Wink

Thanks
 
IP Logged
 
Reply #2 - Apr 5th, 2018 at 5:17pm

Dynon Avionics   Offline
Dynon Official
Dynon Technical Support

Posts: 12912
*****
 
You basically have it nailed. The Vizion and the Dynon don't directly talk to each other or control each other, but your GPS output can be split to feed both. Everything else is correct: GPS and SL30 go to the HS34.
 

Please do not use Private Messaging on form to contact. For private support:
Email: support at dynonavionics dot com
Phone: 425-402-0433 (7am-5pm Pacific weekdays)
IP Logged
 
Reply #3 - Apr 6th, 2018 at 9:33am

Shemp   Offline
New Member
I love flying!

Posts: 6
*
 
Will the hs34 be able to convert the serial input from the gx50  to arinc?  Then use that arinc signal to provide gpss to the vizion?

Thx
 
IP Logged
 
Reply #4 - Apr 8th, 2018 at 2:49am

Jacques   Offline
Junior Member

Posts: 56
**
 
You need a DB30 on the GPSS serial output of the GX50 in order to convert it to ARINC (GPSS). Send me a PM if you want the installation manual of the DB30.

But better send TxD1 of the GX50 to one serial input of the HX34 (the second one is taken by the SL30). And TxD2 of the GX50 (configured for GPSS) to the Trutrak Vision.
« Last Edit: Apr 8th, 2018 at 2:50am by Jacques »  
IP Logged
 
Reply #5 - Apr 9th, 2018 at 6:30pm

Dynon Avionics   Offline
Dynon Official
Dynon Technical Support

Posts: 12912
*****
 
The HS34 does not do any serial to ARINC conversion.
 

Please do not use Private Messaging on form to contact. For private support:
Email: support at dynonavionics dot com
Phone: 425-402-0433 (7am-5pm Pacific weekdays)
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print