Welcome, Guest. Please Login or Register
Dynon Avionics, Inc.
 
Welcome to the Dynon Avionics forum!


  HomeHelpSearchLoginRegister  
 
 
Page Index Toggle Pages: 1
Send Topic Print
Configuring GTN 650 (Read 563 times)
Apr 7th, 2018 at 6:43am

PhantomPholly   Offline
Expert

Posts: 582
*****
 
Hi all,

In the manual I found what my settings need to be in order to output the correct info to the Skyview unit, but I cannot find how to access the setup screens on the GTN 650 which need to be accessed to configure those settings.

Is there something I need to do on boot up to access these configuration screens? I recall some combination of keys held on startup to access system configuration on the GNS 480, but the 650 does not seem to have much in the way of buttons.

Thanks!
 
IP Logged
 
Reply #1 - Apr 8th, 2018 at 12:15pm

Ranman926   Offline
New Member
I love flying!

Posts: 1
*
 
Hold the home button during power up to get into configuration mode.
 
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print