Welcome, Guest. Please Login or Register
Dynon Avionics, Inc.
 
Welcome to the Dynon Avionics forum!


  HomeHelpSearchLoginRegister  
 
 
Page Index Toggle Pages: 1
Send Topic Print
Servo swap and "Shoutout" to Dynon (Read 260 times)
Apr 14th, 2018 at 1:36pm

BlueCH750   Offline
Junior Member
Low and Slow

Gender: male
Posts: 64
**
 
Kudos Dynon!!

Recently swapped out my SV32 servo for the SV42 to resolve a pitch slipping issue with my STOL CH750.  It appears that air loads on the elevator are a bit too much for the SV32.  Pulled the servo on a Friday and one week later received and installed the SV42. System software did a software update to the servo, I did a test and calibration along with ground and flight tests.  Problem seems to be solved - though I need some more flight testing to be definitive about it.  Dynon could not have made the process any easier or been more responsive regarding swapping my 3 years old servo for the SV42 servo.  THANK YOU!!  I am amazed at how capable the SV software and hardware system is overall!

Happy Dynon flyer  Cool
 

STOL CH750 - The mighty "Sky Turtle"
Dual Dynon 7" classic display and two axis A/P
IP Logged
 
Reply #1 - Apr 15th, 2018 at 12:41am

David Brown   Offline
Senior Member

Posts: 473
****
 
They ARE the best in terms of customer service of any supplier I have dealt with in aviation. Along with say GAMI, they are hard to beat  Cheesy

I might be a bit biased Smiley
 
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print