Welcome, Guest. Please Login or Register
Dynon Avionics, Inc.
 
Welcome to the Dynon Avionics forum!


  HomeHelpSearchLoginRegister  
 
 
Page Index Toggle Pages: 1
Send Topic Print
Skyview System Won't Boot (Read 214 times)
May 10th, 2018 at 6:39am

Mike S   Offline
Frequent Poster
I love flying!
St. Paul, MN

Gender: male
Posts: 15
**
 
This morning, when I tried to start my Skyview System it wouldn't boot.  When I turned on the power to the Skyview, the display stayed completely dark.  No initial splash screen or anything else.

I disconnected the main connector to the Skyview Display and verified that there was power on pins 1 and 20.  Reconnected connector and tried again.  Still completely blank display.  No fans running either.

I have the latest firmware installed in the system.

Any suggestions on what might be wrong or did the unit die on me?
 
IP Logged
 
Reply #1 - May 10th, 2018 at 10:13am

krw5927   Offline
Full Member
I love flying!

Posts: 109
***
 
If you have the Skyview backup battery, hold down Button #1 and see if it boots from the battery.
 
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print