Welcome, Guest. Please Login or Register
Dynon Avionics, Inc.
 
Welcome to the Dynon Avionics forum!


  HomeHelpSearchLoginRegister  
 
 
Page Index Toggle Pages: 1
Send Topic Print
ASAHRS Fail Internal Error: Multiple Sensors (Read 355 times)
May 20th, 2018 at 3:10pm

ScrtSqrl   Offline
New Member
I love flying!

Posts: 9
*
 
Got this error in the plane today.
I’ll upload troubleshooting logs shortly.

It alerted about 10 seconds after what otherwise looked like a normal boot up.

I shut down and restarted multiple times.
With same results.

Any ideas?

Thank you.  Smiley
 
IP Logged
 
Reply #1 - May 20th, 2018 at 8:44pm

RV8JD   Offline
New Member

Posts: 6
*
 
I notice that almost no one bothers to scale their photos before posting to the Forum.  It would sure help in troubleshooting!
« Last Edit: May 20th, 2018 at 8:48pm by RV8JD »  
IP Logged
 
Reply #2 - May 21st, 2018 at 5:47pm

Dynon Avionics   Offline
Dynon Official
Dynon Technical Support

Posts: 12986
*****
 
I think we're going to need to see your ADAHRS here. Give our support team a call at 425-402-0433 or support at dynonavionics dot com for further help with this.
 

Please do not use Private Messaging on form to contact. For private support:
Email: support at dynonavionics dot com
Phone: 425-402-0433 (7am-5pm Pacific weekdays)
IP Logged
 
Reply #3 - Jun 30th, 2018 at 5:14am

Northernliving   Offline
New Member
I love flying!

Posts: 6
*
 
I had the same error after turning avionics master OFF during the boot phase.  Didn't think that would cause a problem, but it seems that is the case - or a coincidence. 

Is there anything that can be done in the field with a firmware flash, or is this a return to Dynon only repair?
 
IP Logged
 
Reply #4 - Jul 2nd, 2018 at 6:02pm

Dynon Avionics   Offline
Dynon Official
Dynon Technical Support

Posts: 12986
*****
 
It's a Dynon-only repair.
 

Please do not use Private Messaging on form to contact. For private support:
Email: support at dynonavionics dot com
Phone: 425-402-0433 (7am-5pm Pacific weekdays)
IP Logged
 
Reply #5 - Jul 3rd, 2018 at 5:19pm

Northernliving   Offline
New Member
I love flying!

Posts: 6
*
 
I was able to make a field repair.... a mud dauber wasp was was nesting in the AOA port!   All is good.  Smiley
« Last Edit: Jul 3rd, 2018 at 5:21pm by Northernliving »  
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print