Welcome, Guest. Please Login or Register
Dynon Avionics, Inc.
 
Welcome to the Dynon Avionics forum!


  HomeHelpSearchLoginRegister  
 
 
Page Index Toggle Pages: 1
Send Topic Print
Showing a target descent rate as a number or a bug (Read 144 times)
Jun 9th, 2018 at 5:02pm

bdflyer   Offline
New Member
I love flying!

Posts: 1
*
 
Do you know if its possible to set up a custom indication on the PFD?

Here is what I’m looking for:

1.    Show a target descent rate (“gpdr”)
2.    GPDR (Glide Path Descent Rate) is a dynamic, calculated target descent rate (can be a bug)
3.    PFD calculates the GPDR using this formula: (gps_ground_speed * 5) = GPDR
4.    GPDR represents the target descent rate to maintain a standard three degree glide path
 
IP Logged
 
Reply #1 - Jun 10th, 2018 at 4:17am

Skysailor   Offline
Senior Member

Posts: 394
****
 
Take a look at the VNAV setup in the PFD section. The manual describes both the setup and use.
 
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print