Welcome, Guest. Please Login or Register
Dynon Avionics, Inc.
 
Welcome to the Dynon Avionics forum!


  HomeHelpSearchLoginRegister  
 
 
Page Index Toggle Pages: 1
Send Topic Print
software for SV-HDX800 to display dual engine data (Read 305 times)
Jun 19th, 2018 at 3:58pm

Shiloh   Offline
New Member
I love flying!

Posts: 7
*
 
I have a project that has two lycoming 4 cyl FI engines.  I would like to put the data on a single HDX display. 
 
IP Logged
 
Reply #1 - Jun 19th, 2018 at 4:43pm

Dynon Avionics   Offline
Dynon Official
Dynon Technical Support

Posts: 12965
*****
 
It's not possible today, but we're doing some work that may support this soon. No promises at this point.
 

Please do not use Private Messaging on form to contact. For private support:
Email: support at dynonavionics dot com
Phone: 425-402-0433 (7am-5pm Pacific weekdays)
IP Logged
 
Reply #2 - Jun 20th, 2018 at 7:06am

Shiloh   Offline
New Member
I love flying!

Posts: 7
*
 
Can you use 2 separate HDX displays? One for each engine.
 
IP Logged
 
Reply #3 - Jun 20th, 2018 at 4:40pm

jakej   Offline
Expert
Australia

Gender: male
Posts: 1551
*****
 
Not at this stage   Wink only possible withe the Classis SV.
« Last Edit: Jun 20th, 2018 at 4:41pm by jakej »  
IP Logged
 
Reply #4 - Jun 23rd, 2018 at 5:15am

Shiloh   Offline
New Member
I love flying!

Posts: 7
*
 
Hi,

I was thinking of not hooking up two of the HDX displays.  However the using the RS232 input from the GPS antenna and the ADSB in.  I would have each HDX with a separate EMS.  Would there have to be a separate line for a separated AHARS box or can I hook that to both?

Thanks
 
IP Logged
 
Reply #5 - Jun 23rd, 2018 at 6:11am

jakej   Offline
Expert
Australia

Gender: male
Posts: 1551
*****
 
No separate wiring for # 2 ADAHRS, you can piggyback it onto the existing unit (Dynon sells a simple kit) or install it alongside the other one & add a splitter cable to 'splice' it into the system - then do a config & it should be good to go.  Thats how mine is & works a treat  Wink
 
IP Logged
 
Reply #6 - Jun 30th, 2018 at 2:40pm

Shiloh   Offline
New Member
I love flying!

Posts: 7
*
 
Thanks Mate!
 
IP Logged
 
Reply #7 - Jun 30th, 2018 at 5:54pm

jakej   Offline
Expert
Australia

Gender: male
Posts: 1551
*****
 
I’ve been thinking some more on this ( that’s a worry  Grin) -

In your dual engine installation my guess is -
1. do not use the Ethernet cable between the screens
2. disconnect #2 EMS module & #2 screen from the network.
3. Do a system config using #1 screen
Then reverse that order for #2 screen ie disconnect #1 Ems & screen ... etc & it should be ok - DS may want to chime in here  Wink
 
IP Logged
 
Reply #8 - Jul 1st, 2018 at 10:06am

Shiloh   Offline
New Member
I love flying!

Posts: 7
*
 
That's what I was figuring to do! Wink
 
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print