Welcome, Guest. Please Login or Register
Dynon Avionics, Inc.
Welcome to the Dynon Avionics forum!
Page Index Toggle Pages: 1
Send Topic Print
UL Power engine fuel consumption (Read 428 times)
Jul 2nd, 2018 at 6:06pm

GWMotley   Offline
Frequent Poster
Experimental aircraft

Gender: male
Posts: 13
There are two output leads from their ECU which can provide information about fuel consumption based on duty output or pulses per second from the injectors. That is 100% duty equals 48 liters per hour or 170pulses per second equals 48 liters per hour. Can either of the outputs be used by Dynon to provide fuel flow information on the display?

Sonex built and flown
Zenith CruZer built and currently flying.
IP Logged
Reply #1 - Jul 3rd, 2018 at 5:08pm

Dynon Avionics   Offline
Dynon Official
Dynon Technical Support

Posts: 13170
SkyView does not currently have the ability to use duty cycle as a fuel flow input.

Please do not use Private Messaging on form to contact. For private support:
Email: support at dynonavionics dot com
Phone: 425-402-0433 (7am-5pm Pacific weekdays)
IP Logged
Page Index Toggle Pages: 1
Send Topic Print