Welcome, Guest. Please Login or Register
Dynon Avionics, Inc.
 
Welcome to the Dynon Avionics forum!


  HomeHelpSearchLoginRegister  
 
 
Page Index Toggle Pages: 1
Send Topic Print
D-180 Inaccurate Capacitive Fuel Levels (Read 60 times)
Aug 6th, 2018 at 2:33pm

melkel2000   Offline
Frequent Poster

Posts: 22
**
 
Hello:

I've been flying with this issue since my first flight in 2012 and I was wondering if there has been any resolution to this.

I have calibrated several times and each time I get the "there was no change in the voltage reading" warning. This is due to the very small change the Dynon sees during calibration.

As a result, my fuel gauges on the D-180 are accurate towards full but are significantly off near empty. They indicate that I have a couple of gallons more fuel than I really have. Not a good thing.

I finally got tired of re-calibrating the tanks and have accepted the issue. However, it's very disappointing that the reason I went with the capacitive set up is for improved accuracy. I would have been better off installing floats.

I bought the converters from Dynon years ago and the capacitive plates in the tank from Vans. I'm flying an RV-9A.

Has there been any solution to this issue?
 
IP Logged
 
Reply #1 - Aug 10th, 2018 at 12:29pm

RayInGA   Offline
Senior Member
I love aviation!
Richmond Hill, GA

Gender: male
Posts: 463
****
 
Mine is similar but mostly because, when I did the calibration, I was not expecting the "no or little change" warning, so I did not hit the button to move on and did another pour.

Since then, I have improved things by checking the value for each tank prior to  refueling and adjusting the calibration little by little.

If you are using different types of fuel, the capacitive senders will only be accurate for one type of fuel, due to density changes.
 

Ray Eaker
RV-7A flying since 27 Jan 2017
Dual Skyview 1000T with all available Dynon VFR goodies
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print