Welcome, Guest. Please Login or Register
Dynon Avionics, Inc.
 
Welcome to the Dynon Avionics forum!


  HomeHelpSearchLoginRegister  
 
 
Page Index Toggle Pages: 1
Send Topic Print
Skyview EFIS as a CDI/Glideslope for the Garmin 48 (Read 349 times)
Aug 31st, 2018 at 3:14pm

Alex   Offline
Junior Member
Mebane, NC

Gender: male
Posts: 56
**
 

Does anyone know if you can use the Dynon Skyview EFIS as a CDI/glideslope with the 480W?  Have the EFIS display the CDI/Glideslope.

Thank you...
 
IP Logged
 
Reply #1 - Aug 31st, 2018 at 4:05pm

Garrett   Offline
Full Member
I love flying!
Tampa Fl

Posts: 186
***
 
It should be able to do that thru the ARINC 429 ports using the Dynon 429 interface module.
 
IP Logged
 
Reply #2 - Sep 1st, 2018 at 7:42am

dlloyd   Offline
Full Member
Locust, NC

Gender: male
Posts: 111
***
 
ARINC connections for the 480 to 429 shown on page 12-10 of the installation guide, revision AC.
« Last Edit: Sep 1st, 2018 at 8:03am by dlloyd »  
IP Logged
 
Reply #3 - Sep 1st, 2018 at 2:12pm

Alex   Offline
Junior Member
Mebane, NC

Gender: male
Posts: 56
**
 
dlloyd wrote on Sep 1st, 2018 at 7:42am:
ARINC connections for the 480 to 429 shown on page 12-10 of the installation guide, revision AC.

Thank you...
 
IP Logged
 
Reply #4 - Sep 3rd, 2018 at 9:16pm

krw5927   Offline
Full Member
I love flying!

Posts: 115
***
 
Yes, mine works great!  Wire and setup per the skyview installation manual and all is well.
 
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print