Welcome, Guest. Please Login or Register
Dynon Avionics, Inc.
 
Welcome to the Dynon Avionics forum!


  HomeHelpSearchLoginRegister  
 
 
Page Index Toggle Pages: 1
Send Topic Print
Dual Displays (Read 369 times)
Sep 23rd, 2018 at 4:01am

Bob Reinhardt   Offline
Frequent Poster
I love flying!
College Station, Texas

Gender: male
Posts: 28
**
 
When I rebuilt my panel I replaced the 8" display with a 10" touch and bought a new back-up battery. I still have the smaller display and the battery.  Is there a "slave" harness made so I can install the smaller unit on the co-pilots side without actually having to wire the second unit to all inputs the D37 harness on the main unit connects to?  In other words can I connect the second unit to the first and mirror it rather than to the sensors?
 
IP Logged
 
Reply #1 - Sep 24th, 2018 at 6:29am

RayInGA   Offline
Expert
I love aviation!
Richmond Hill, GA

Gender: male
Posts: 546
*****
 
There is no slave harness. You will need a new DB37 with all the same connections as your other screen. Otherwise, you will not have redundancy should the first screen stop working.

The install manual has all the details.
 

Ray Eaker
RV-7A flying since 27 Jan 2017
Dual Skyview 1000T with all available Dynon VFR goodies
IP Logged
 
Reply #2 - Sep 24th, 2018 at 5:06pm

Dynon Avionics   Offline
Dynon Official
Dynon Technical Support

Posts: 13064
*****
 
Ditto what Ray says. There isn't a slave mode. Each display requires serial ports, audio wires, and other inputs/outputs to be paralleled, and each diaplsy requires a SkyView Network connection to the other devices (because of the nature of the network, this really only means a single SkyView Network connection to anywhere).
 

Please do not use Private Messaging on form to contact. For private support:
Email: support at dynonavionics dot com
Phone: 425-402-0433 (7am-5pm Pacific weekdays)
IP Logged
 
Reply #3 - Sep 25th, 2018 at 6:39am

Bob Reinhardt   Offline
Frequent Poster
I love flying!
College Station, Texas

Gender: male
Posts: 28
**
 
Thanks for the info.  Too bad. I do understand the need for separate wires for redundancy, but the ability to mirror would greatly simplify giving my right seat a better view of the instruments.
 
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print