Welcome, Guest. Please Login or Register
Dynon Avionics, Inc.
 
Welcome to the Dynon Avionics forum!


  HomeHelpSearchLoginRegister  
 
 
Page Index Toggle Pages: 1
Send Topic Print
EMS D10 pressures,cht's blinking prior start (Read 188 times)
Sep 27th, 2018 at 6:58pm

John MN   Offline
New Member
I love flying!

Posts: 9
*
 
With initial power up and prior to engine start, the D10 EMS has blinking fuel/oil pressure and cht/oil temps. I have tried to disable the alarms numerous times as per 5-3 of the installation guide but have had no luck. Once again, these blinking lights occur as soon as the power comes on. Thanks for your help
 
IP Logged
 
Reply #1 - Oct 1st, 2018 at 5:38pm

Dynon Avionics   Offline
Dynon Official
Dynon Technical Support

Posts: 13047
*****
 
If you have oil pressure (or rpm), that will disable the power on alarms feature. I'm not sure what you mean by blinking though. Can you send a video of the sequence you're seeing to support at dynonavionics dot com?
 

Please do not use Private Messaging on form to contact. For private support:
Email: support at dynonavionics dot com
Phone: 425-402-0433 (7am-5pm Pacific weekdays)
IP Logged
 
Reply #2 - Oct 18th, 2018 at 5:48pm

John MN   Offline
New Member
I love flying!

Posts: 9
*
 
Sorry for the long delay but I thought this forum would notify me of the reply to my initial question and did not check this site. I'll send a video to support ASAP.  Thanks, John
 
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print