Welcome, Guest. Please Login or Register
Dynon Avionics, Inc.
 
Welcome to the Dynon Avionics forum!


  HomeHelpSearchLoginRegister  
 
 
Page Index Toggle Pages: 1
Send Topic Print
New ADSB-472 (Read 712 times)
Oct 8th, 2018 at 7:07pm

HomeBuilt101   Offline
Senior Member
I love flying!

Posts: 251
****
 
I finally am getting the replacement ADSB-472!!!

The Installation Manual says "Once mounted and wired, be sure to update the serial settings: SETUP MENU > SYSTEM
SETUP > SERIAL PORT SETUP > SERIAL PORT x SETUP (the serial port you wired the SV-ADSB-
472 to) > SERIAL IN DEVICE > SV-ADSB-472 > ACCEPT (button)

So this is simply a "find my new device" and press Accept?  That sound too easy...is there any other gotchas or tips and tricks to be concerned with?

The part about the "SERIAL PORT x SETUP (the serial port you wired the SV-ADSB-472 to)" is a bit confusing...I do not remember finding the serial port the last time...is it as simple as looking on the screen and finding the item on the list called "ADSB-472"?

-Any operational changes or feedback you can share?

THANKS for the help!!!
 
IP Logged
 
Reply #1 - Oct 9th, 2018 at 7:34am

airguy   Offline
Senior Member
SkyView Flight Tester
Gods Country - west Texas

Gender: male
Posts: 375
****
 
Yep, it really is that simple, on both questions. It's as close to "plug and play" as you can get.
 
IP Logged
 
Reply #2 - Oct 9th, 2018 at 11:38am

HomeBuilt101   Offline
Senior Member
I love flying!

Posts: 251
****
 
>It really is that simple

Nice...thats why I picked Dynon!!!

THANKS AGAIN!!!
 
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print