Welcome, Guest. Please Login or Register
Dynon Avionics, Inc.
 
Welcome to the Dynon Avionics forum!


  HomeHelpSearchLoginRegister  
 
 
Page Index Toggle Pages: 1
Send Topic Print
EMS-D10 and 150psi sensor for fuel pressure (Read 103 times)
Oct 23rd, 2018 at 1:33am

Teemu Patja   Offline
New Member
EFHF

Posts: 2
*
 
I recently converted my engine to use electronic fuel injection and switched my fuel pressure sensor from the Dynon 15 PSI sensor to the Dynon 150 PSI sensor (sold as "oil pressure sensor", but same kind of Kavlico sensor as 5, 15 and 50 PSI).

Is there a way to configure the sensor to show correct values?

I read in the documentation that only max 50 PSI sensor is supported as a sensor type for fuel pressure in the latest firmware.
 

Aircraft: EV97, Rotax 912 ULS with EFI
System: EFIS-D100, EMS-D10, AP74
IP Logged
 
Reply #1 - Oct 23rd, 2018 at 5:46pm

Dynon Avionics   Offline
Dynon Official
Dynon Technical Support

Posts: 13047
*****
 
Unfortunately not. 50 PSI is the highest supported pressure sensor on the EMS-D10. See https://www.dynonavionics.com/includes/guides/EMS-D10_EMS-D120_FlightDEK-D180_Se...
 

Please do not use Private Messaging on form to contact. For private support:
Email: support at dynonavionics dot com
Phone: 425-402-0433 (7am-5pm Pacific weekdays)
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print