Welcome, Guest. Please Login or Register
Dynon Avionics, Inc.
 
Welcome to the Dynon Avionics forum!


  HomeHelpSearchLoginRegister  
 
 
Page Index Toggle Pages: 1
Send Topic Print
Skyview Question (Read 175 times)
Oct 25th, 2018 at 3:02pm

Dude   Offline
Frequent Poster
I love flying!

Posts: 17
**
 
On my Skyview, Im getting the following message- B/U Batt Low Charge. The last time I did the backup battery test, it passed. My volt meter is showing 13.8 volts during flight, what is the best way to check my backup battery? The battery is app 3 years old.

Thanks
 
IP Logged
 
Reply #1 - Oct 25th, 2018 at 3:48pm

mmarien   Offline
Expert
Murray M.
Saskatoon SK CAN

Gender: male
Posts: 1178
*****
 
I believe that it takes about 4 hours of flight to charge the backup battery. When I do the backup battery test, I put a charger on the aircraft battery overnight and turn on the master so that Skyview is on. You need a charger that doesn't switch on and off and supplies >4A.

Check to make sure the charger is supplying enough amps to run Skyview and charge the backup battery. There is a page in Skyview Setup that shows the battery and charge status.
 

Glasair II FT - o320 - P-Mags - EFII - MTV 3 Blade CS - VP-X - Single 10" Skyview - Stratux Dual Band - zooooom ...
IP Logged
 
Reply #2 - Oct 25th, 2018 at 5:41pm

Dude   Offline
Frequent Poster
I love flying!

Posts: 17
**
 
Thanks for your help!
 
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print