Welcome, Guest. Please Login or Register
Dynon Avionics, Inc.
Welcome to the Dynon Avionics forum!
Page Index Toggle Pages: 1
Send Topic Print
Unable to clear D180 log (Read 270 times)
Nov 2nd, 2018 at 3:15am

Dave Johnson   Offline
New Member

Posts: 9
I have a D180 S/W version 5.6.1 when I try to download the log it counts up to 46,000 readings and then starts to save the file to disc. This fails with an overflow error message. The result is that I cannot clear the log. Is there any way to clear the log without downloading it?
I suspect that the problem writing to disc is the large number of readings, I normally download after each flight. I'm hoping that, once I have cleared the log, I will not get the overflow message again.
IP Logged
Reply #1 - Nov 5th, 2018 at 6:44pm

Dynon Avionics   Offline
Dynon Official
Dynon Technical Support

Posts: 13142
Try loading the contents of the attached zip (you need to extract the .efs file within, and load that). It should clear the log when you load it via the support program. It will only work on the D180, and only with 5.6.1.

Please do not use Private Messaging on form to contact. For private support:
Email: support at dynonavionics dot com
Phone: 425-402-0433 (7am-5pm Pacific weekdays)
IP Logged
Page Index Toggle Pages: 1
Send Topic Print