Welcome, Guest. Please Login or Register
Dynon Avionics, Inc.
 
Welcome to the Dynon Avionics forum!


  HomeHelpSearchLoginRegister  
 
 
Page Index Toggle Pages: 1
Send Topic Print
Serial Port Encoder (Read 415 times)
Nov 12th, 2018 at 3:46pm

Luis   Offline
New Member
I love flying!

Posts: 3
*
 
Hello

I have a SV-D1000 Classic installed in my ULM. I have a transponder Microair T2000 SFL without encoder. I would like to use some of the serial ports of SV to give the altitude information to the transponder and it run in C mode. I have looked for in the System Instalatión Guide but I did not find the set up (configuration) of the serial port to run like encoder.
Could you help me?

Thanks

Luis
 
IP Logged
 
Reply #1 - Nov 13th, 2018 at 12:23pm

RayInGA   Offline
Expert
I love aviation!
Richmond Hill, GA

Gender: male
Posts: 547
*****
 
Luis,

See page 11-16 (rev AD) of the installation manual. The settings are for the Trig transponder but may work with yours as well.
« Last Edit: Nov 13th, 2018 at 12:24pm by RayInGA »  

Ray Eaker
RV-7A flying since 27 Jan 2017
Dual Skyview 1000T with all available Dynon VFR goodies
IP Logged
 
Reply #2 - Nov 14th, 2018 at 11:12am

Luis   Offline
New Member
I love flying!

Posts: 3
*
 
Excuse me, Trig transponder are the SV-XPNDR-261 or SV-XPNDR-262?

Thanks

Luis
 
IP Logged
 
Reply #3 - Nov 14th, 2018 at 3:51pm

RV8JD   Offline
Frequent Poster

Posts: 14
**
 
Luis wrote on Nov 14th, 2018 at 11:12am:
Excuse me, Trig transponder are the SV-XPNDR-261 or SV-XPNDR-262?

Thanks

Luis


The SV-XPNDR-261 (Class 1, FAA 2020 ADS-B OUT) is the Trig Avionics TT22 Mode S Transponder.

The SV-XPNDR-262 (Class 2) is the Trig Avionics TT21 Mode S Transponder.
« Last Edit: Nov 14th, 2018 at 3:56pm by RV8JD »  
IP Logged
 
Reply #4 - Nov 15th, 2018 at 12:54pm

Luis   Offline
New Member
I love flying!

Posts: 3
*
 
My transponder is only mode C not mode S. Will It work with the encoder serial port especifications of mode S transponder?

Thanks
 
IP Logged
 
Reply #5 - Nov 15th, 2018 at 1:13pm

RayInGA   Offline
Expert
I love aviation!
Richmond Hill, GA

Gender: male
Posts: 547
*****
 
Luis wrote on Nov 15th, 2018 at 12:54pm:
My transponder is only mode C not mode S. Will It work with the encoder serial port especifications of mode S transponder?

Thanks


Luis,

That would be a question for the MFG of your transponder. Below is a link to their installation manual. There is mention of connecting to a Dynon D10A. You will need to give them a call, if that information does not work for you.

http://www.microair.com.au/admin/uploads/documents/T2000SFLInstallationManual01R...
 

Ray Eaker
RV-7A flying since 27 Jan 2017
Dual Skyview 1000T with all available Dynon VFR goodies
IP Logged
 
Reply #6 - Nov 16th, 2018 at 4:00pm

Dynon Support   Offline
Forum Administrator
Dynon Employee
Dynon Technical Support

Posts: 13226
*****
 
Luis,
The serial output of the SkyView should work with your transponder.

Please look in the SkyView Installation Manual which can be downloaded here:

http://dynonavionics.com/public_html/yabbfiles/Attachments/SkyView_System_Instal...

Pages 4-25, 4-26 should answer your question.

-Dynon
 

Please do not use Private Messaging on forum to contact. For private support:
Email: support at dynonavionics dot com
Phone: 425-402-0433 (7am-5pm Pacific weekdays)
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print