Welcome, Guest. Please Login or Register
Dynon Avionics, Inc.
Welcome to the Dynon Avionics forum!
Page Index Toggle Pages: 1
Send Topic Print
Skyview HDX and UL 350i fuel injected engine (Read 217 times)
Nov 18th, 2018 at 1:27pm

Dougm   Offline
New Member
I love flying!

Posts: 1
I am completing my Zenith Cruzer and calibrating the tanks. I bought the Skyview from Zenith and at the time was told that I did not need a fuel flow transducer, ie, the Skyview made those calculations. I have read the Dynon documentation several times and it refers to having an 'optional fuel flow sensor' or transducer. Bottom line that I need is do I need a fuel flow transducer with the HDX?
IP Logged
Reply #1 - Nov 18th, 2018 at 6:33pm

JakeJ   Offline

Gender: male
Posts: 1584
From the ULPower website  Im figuring that you use an output from the system eg ECU to do that 😉
IP Logged
Reply #2 - Nov 26th, 2018 at 6:19pm

Dynon Avionics   Offline
Dynon Official
Dynon Technical Support

Posts: 13117
Yes, for fuel flow calculations, you need a fuel flow transducer. If the ECU had an output that mimics a EI/Floscan style sensor, that would work too (I have no knowledge that it does, though)

Please do not use Private Messaging on form to contact. For private support:
Email: support at dynonavionics dot com
Phone: 425-402-0433 (7am-5pm Pacific weekdays)
IP Logged
Page Index Toggle Pages: 1
Send Topic Print