Welcome, Guest. Please Login or Register
Dynon Avionics, Inc.
Welcome to the Dynon Avionics forum!
Page Index Toggle Pages: 1
Send Topic Print
Adsb errors (Read 326 times)
Dec 29th, 2018 at 8:12am

tstoneman   Offline
New Member

Gender: male
Posts: 5
Received certified mail from FAA this week. Said they were monitoring every flight and the adsb data had errors and it needed to be corrected.
See attached report.   Need some help on how to remedy the error. The person we talked with said they have had this Faa group up for only one year and they are behind but catching up. They analyze every flight. Had no issue with us flying the aircraft with the errors.  Could not help with a remedy due to the gov shutdown. But was making a list for when things get back up and running.

Please advise.

IP Logged
Reply #1 - Dec 29th, 2018 at 5:55pm

dlloyd   Offline
Full Member
Locust, NC

Gender: male
Posts: 124
Probably 99% of the adsb failure reports involving Dynon (and everyone else's) equipment will eventually be found to be improper setup.  What equipment have you?
IP Logged
Reply #2 - Jan 2nd, 2019 at 8:38am

RayInGA   Offline
I love aviation!
Richmond Hill, GA

Gender: male
Posts: 638
What dlloyd said...

SIL=1 is not valid unless you are using the GPS-250 receiver, which the FAA has decided to no longer accept. If you have the 2020 GPS receiver, check your configuration and ensure the SIL is set to 3.

Ray Eaker
RV-7A flying since 27 Jan 2017
Dual Skyview 1000T with all available Dynon VFR goodies
IP Logged
Page Index Toggle Pages: 1
Send Topic Print