Specifications

Mechanical

Mounting: 6.95” wide x 4.90” tall x 4.51” deep (177 x 125 x 115 mm)

Mounting: Supplied with mounting tray that facilitates front removal of EFIS

Weight: 2 lb. 6 oz (1.33 kg)

Environmental

Operating Temperature: -22 to 122 F (-30 to 50 C)

Power

Voltage: 10 - 30 Vdc

Power: 14 watts typical

Connections

Wiring:

• D-25 female connector for EGT/CHT connections
• D-37 male connector for probes, power, PC port, DSAB

Screen

Type: AMLCD, TFT (Thin Film Transistor)

Backlight: 0.8 to 400 nit, user adjustable

Size: 7.0” diagonal (178 mm)

Resolution: 854 x 480 color pixels

User Interface

Menu: Softkey menus

Buttons: 6

Power On/Off: Furthest left button

Momentary press to turn on

Hold for 2 seconds to turn off

Hotkeys: Page switching, furthest left and right buttons

Timers

Flight: Current flight, 99 hrs 59 min max

Trip: Total trip hours for tracking multiple leg flights, can be reset via softkey, 99 hrs 59 min max

Timer: Generic, can be reset via softkey, 99 hrs 59 min max

Tach: 99999.9 hrs max

Hobbs : Activated by oil pressure, 99999.9 hrs max

Sensor Inputs

6 - EGT (Type K Thermocouple)

6 - CHT (Type J Thermocouple)

2 - Fuel Level (Resistive or Capacitance with 5 volt output)

2 - RPM (Frequency)

2 - Contacts (Canopy, Landing Gear, Fuel Switch, Carb Heat, Fuel Pump, Contact 1, Contact 2)

1 - Manifold Pressure (Voltage)

1 - Oil Temperature (Resistive)

1 - Oil Pressure (Resistive)

1 - Fuel Pressure (Resistive)

1 - Fuel Flow (Frequency)

1 - Amps (shunt)

1 - Volts

1 - Turbine Inlet Temperature (Type K Thermocouple)

3 - General Purpose (Either resistive or voltage for OAT, Fuel Tanks 3 & 4, Coolant Temp/Press, Carb Temp)

Outputs

1 - Alarm Light Contact

1 - Audio Alarm

1 - RS-232

2 - DSAB (Dynon Smart Avionics Bus)