Specifications

Mechanical

Size: 6.95” wide x 4.90” tall x 4.51” deep
(177 x 125 x 115 mm)

Mounting: Supplied with mounting tray that facilitates front removal of EFIS

Weight: 3 lb. (1.36 kg)
3 lb. 6 oz with internal battery option (1.6 kg)

Power

Voltage: 10 - 30 Vdc

Power: 14 watts normal operation, 26 watts (max) if optional internal battery is charging

Environmental

Operating Temperature: -22 to 122 F (-30 to 50 C)

Screen

Type: AMLCD, TFT (Thin Film Transistor)

Backlight: 0.8 to 400 nit , user adjustable

Size: 7.0” diagonal (178 mm)

Resolution: 854 x 480 color pixels

Measurement Parameters

EFIS

Airspeed: 30 - 325 knots indicated (35 - 374 mph)

Altitude: -1200 to 30,000 Feet (-366 to 9144 m)

Attitude: automatically recovers from any excursions exceeding 150 degrees per second in roll, pitch and yaw.

G-meter: -10 g's to +10 g's

Engine

6 - EGT (Type K Thermocouple)

6 - CHT (Type J Thermocouple)

2 - Fuel Level (Resistive or Capacitance with 5 volt output)

2 - RPM (Frequency)

2 - Contacts (Canopy, Landing Gear, Fuel Switch, Carb Heat, Fuel Pump, Contact 1, Contact 2)

1 - Manifold Pressure (Voltage)

1 - Oil Temperature (Resistive)

1 - Oil Pressure (Resistive)

1 - Fuel Pressure (Resistive)

1 - Fuel Flow (Frequency)

1 - Amp

1 - Volts

1 - Turbine Inlet Temperature (Type K Thermocouple)

3 - General Purpose (Either resistive or voltage for OAT, Fuel Tanks 3 & 4, Coolant Temp/Press, Carb Temp)

Connections

Inputs

Wiring:

• Main Instrument Connections - D-25 male connector
• EGT/CHT Thermocouple Connections - D-25 female connector
• Engine Probe Connections - D-37 pin male connector

Plumbing: 1/8” NPT (female) each for pitot, static and angle of attack

Outputs

1 - Alarm Light Contact

1 - Audio Alarm

1 - RS-232

1 - DSAB (Dynon Smart Avionics Bus)