Discontinued Products

The following products are no longer manufactured or sold by Dynon Avionics.

SkyView

Discontinued Product Substitute Product
SV-ADSB-470 Traffic and Weather Receiver SV-ADSB-472 Dual Band Traffic and Weather Receiver


Pocket Panel EFIS

Discontinued Product Substitute Product
D1 Pocket Panel D3 Pocket Panel
D2 Pocket Panel D3 Pocket Panel


D10/D100 Series Products
The EFIS-D10 and the standard brightness versions of the EFIS-D100, EMS-D120, and FlightDEK-D180 are no longer available. The SuperBright versions are still available. The following table shows the products that should be substituted for the discontinued models.

Discontinued Product Substitute Product
EFIS-D10 EFIS-D10A*
EFIS-D100 System #100533-000 EFIS-D100 System with SuperBright Screen #100533-001
EFIS-D100 Instrument Only #100534-000 EFIS-D100 with SuperBright Screen Instrument Only #100534-001
EMS-D120 System #100566-000 EMS-D120 System with SuperBright Screen #100566-001
EMS-D120 Instrument Only #100584-000 EMS-D120 with SuperBright Screen Instrument Only #100584-001
FlightDEK-D180 System #100565-000 FlightDEK-D180 System with SuperBright Screen #100565-001
FlightDEK-D180 Instrument Only #100567-000 FlightDEK-D180 with SuperBright Screen Instrument Only #100567-001


NOTES:
* The EFIS-D10A does not have internal gray code altitude encoder output like the EFIS-D10 did. Instead, it has serial altitude output that is capable of providing altitude to some of the newest transponders such as the Garmin 327 and 330. If your transponder needs gray code input, you will need our optional Encoder Serial-to-Gray Code Converter Module for your upgraded EFIS-D10A ($80.) This will additionally require a bit of EFIS harness re-wiring. Finally, note that if you own the EDC-D10 remote magnetometer, you will need to rearrange a few of the pins on your EDC connector once you receive your new EDC-D10A.